Copper Washer

• 

  Phi 22 the Copper Washer

  Product description 20Pcs 16mm x 22mm x 2mm Copper Crush Washer Flat Ring Seal Gasket Fitting Package Content : 20 x Copper Washer Color : Copper Tone Weight : 53g Operature temperature: -80 to 30C Operature pressure: 16MPa Melting point: 1083C Copper Provides a Tighter Seal...Read More

• 

  Phi 36 Copper Washer for Ship

  Phi 36 Copper washer for ship Copper gasket is made of high quality copper plate with good weldability. Room temperature tensile strength of annealed sheet is 22-25 kgf/mm, elongation is 45-50%, Brinell hardness (HB) is 35-45. The use temperature is less than 400 °C, the...Read More

• 

  Phi 37 Copper Washer for Ship

  Phi 37 Copper washer for ship The red copper sheet, which is not the same as the cast alloy and has the same thickness as the wall thickness of the article, is called a spacer. The craftsmen regularly place the spacer on the outer surface of the mask. Most gaskets are square,...Read More

• 

  Phi 43 Copper Washer for Ship

  Product description · Operature temperature: -80 to 30C · Operature pressure:16MPa · Melting point: 1083C · Copper Provides a Tighter Seal and Greater Heat Endurance than Steel and Rubber Washers. · Widely applied in the flange and the connection of the chemical plant,...Read More

• 

  Phi 51 Copper Washer for Ship

  Phi 51 Copper washer for ship The rubber ring and the metal ring are integrally bonded and vulcanized. It is a sealing ring used to seal the threads and the flange connection. The ring includes a metal ring and a rubber gasket. Metal ring anti-rust treatment, rubber ring...Read More

• 

  Phi 53 Copper Washer for Ship

  Phi 53 Copper washer for ship The bolted flange connection structure is usually adopted. Therefore, the bolts must be pre-tightened enough to meet the requirements of preliminary sealing during assembly. Accurately controlling the pre-tensioning level is a very difficult...Read More

• 

  Phi 54 Copper Washer for Ship

  Phi 54 Copper washer for ship Copper seals generally use threaded seals. Its sealing principle is that the two joint surfaces press and deform the copper mats, so that the two surfaces of the copper mat are closely attached to the two mating surfaces without the slightest...Read More

• 

  Phi 61 Copper Washer for Ship

  Phi 61 Copper washer for shipCopper seals generally use threaded seals. Its sealing principle is that the two joint surfaces press and deform the copper mats, so that the two surfaces of the copper mat are closely attached to the two mating surfaces without the slightest gap,...Read More

• 

  Phi 64 Copper Washer for Ship

  Phi 64 Copper washer for ship Outsourcing materials: carbon steel, stainless steel 304, 306, copper, aluminum and so on. Filler: asbestos, flexible graphite, PTFE, asbestos rubber sheet and so on. Main application: Suitable for flange sealing of larger diameter pressure...Read More

• 

  Phi 71 Copper Washer for Ship

  Phi 71 Copper washer for ship The corrugated metal-clad gasket is made of expanded graphite, non-asbestos plate, PTFE, ceramic fiber, etc., and the outside is coated with a special cold work process made of thin plates of various materials such as stainless steel, tinplate,...Read More

• 

  Phi 77 Copper Washer for Ship

  Phi 77 Copper washer for ship Copper gasket: use a variety of high-quality plates, the maximum temperature is 600 degrees. Practical pressure 6.3-250bar. Mainly used for valve flange connection, good sealing performance. Specifications from DN15-DN900. FAQ Q: Do you have a...Read More

• 

  Phi 83 Copper Washer for Ship

  Phi 83 Copper washer for ship Pure copper, also known as copper, has a density of 8.92g/cm3}[1] and has a melting point of 1083 degrees. It is non-magnetic. It has good electrical conductivity, thermal conductivity, resistance, and toughness. Copper gasket is a type of...Read More